PARAMTM Hot tack tester is applicable in hot tack property test for plastic film, laminated film and other packaging film. Meanwhile, it is applicable in peel, shear, tension and other test items for adhesive, adhesive tape, laminated film, plastic film, paper and other flexible materials.
Characteristics
Micro-computer control, digital display, PVC operation board;
4 testing functions of hot tack, hot seal, peeling and tensile resistance;
Digital P.I.D temperature control system;
4 force testing range;
6 testing speeds;
Two start modes of manual and foot pedal;
Automatic zero, error alert, overload protection and stroke protection.
RS232 port;
Network transmission interface for LAN data management and Internet data transmission.
Technical Indexes
Seal Temperature: room temperature~250ºC
Temp. Control Accuracy: ±0.2ºC
Dwell Pressure: 0.05MPa~0.7MPa
Dwell Time: 0.1s~999.9s
Delay Time: 0.1s~999.9s
Load Cell Range: 0-200N (optional: 30N 50N 100N)
Accuracy: ±1% of reading force
Resolution: 0.01 N
Test Speed: 100 150 200 300 500 and
Hot Tack (mm/min)
Heat Type: single heating or double heating (also made to order)
Specimen Width: 15mm , 25.4 mm. Or 25 mm(Optional, also made to order)
Stroke: 500 mm
Gas Source Pressure: 0.05MPa ~ 0.7MPa (Users provide gas sources themselves)
Gas Source Inlet: Ф6mm polyurethane pipe
Power: AC 220V 50Hz
Dimensions: 1170mm(L) ×360mm(B) ×460mm(H)
Net weight: 45kg
Standards
ASTM F1921, ASTM F2029, QB/T 2358(ZBY 28004), YBB 00122003
configuration
Standard: Mainframe, footswitch, hot tack clamp, calibration frame
Optional: software, communication cable, non-standard seal jaws, test board, Welding Cloak, non-standard jaws, sample cutter, non-standard specimen fixture
Note: the gas source inlet isФ6mm polyurethane pipe; Users provide compressed air for themselves.
